Nine-tailed Fox Hueforge

6 color hueforge of a very cool image generated by @OneViolentGentleman on civitai! There is a pause in here about 8 hours in to swap the filament for a single AMS. make sure to plan your swaps carefully, for example this is how I did mine, I swapped the blue grey → ice blue and black → white after taking a screenshot to remind myself: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mmThe Model is 135x180mm in size, thickness is 2.2mm. Feel free to scale the X and Y but do not scale the Z dimension! Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Jessie Premium Blue Ice Transmission Distance: 23 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filaments Swap Instructions: Start with Black At layer #4 (0.36mm) swap to Blue At layer #8 (0.52mm) swap to Yel