ninja

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.8mmFilaments Used: (* = Owned) #080a0d PLA PolyLite Black Transmission Distance: 0.3 #75787b * PLA anycubik textGray Transmission Distance: 2.4 #55aaff * PLA Generic sky blue Transmission Distance: 5 #e2dedb PLA PolyLite White Transmission Distance: 5 #ff5500 * PLA Generic orange Transmission Distance: 7.2 #ffff00 * PLA Generic yellow Transmission Distance: 7.2This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #12 (0.6mm) swap to textGray At layer #17 (0.8mm) swap to sky blue At layer #23 (1.04mm) swap to White At layer #30 (1.32mm) swap to orange At layer #38 (1.64mm) swap to yellow for the rest. Boost Me