Ninja Scroll Hueforge

Project: ninjascroll.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 129.45x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 #4734aa PLA PolyLite Temp Purple-Pink-Translucent (Cold) Transmission Distance: 4 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with BlackWARNING: This Slider is at the same Layer as the Next Slider At layer #11 (0.96mm) swap to BambuLab Green At layer #11 (0.96mm) swap to Temp Purple-Pink-Translucent (Cold) At layer #16 (1.36mm) swap to White for the rest.