Nintendo 3DS Original Dock Modified for Shell-Compatible Charging Dock/Nintendo 3DS base

使用任天堂老小3ds原装底座改装可套壳充电底座。需要用到原装底座的两个Y型螺丝、两根弹簧、充电板。需要自己做铜弹片（建议买弹簧顶针更省事儿也好装）。 触点铜片安装位置，穿杜邦线到底部焊接到原装底座的充电板上，注意：左负右正，不要接错。弹簧装到两侧，盖上一体的盖板。嫌麻烦的也可以只打主体，充电线穿上来直接插主机充电。 The following is a translation software translationUse the original Nintendo 3DS base to modify it into a shell charging base.Two Y-shaped screws, two springs, and a charging board from the original base are required.You need to make your own copper spring clip (it is recommended to buy a spring top pin for easier installation).The installation position of the copper contact plate should be welded to the charging board of the original base through the DuPont wire. Note: left negative and right positive, do not connect them incorrectly. Install the spring on both sides and cover it with an integrated cover plate.For those who find it troublesome, you can simply plug the charging cable into the main unit and charge it directly.