Slicer Discord
Nintendo DS Unhinged Shell Replacement – Modelo 3D imprimible de MakerWorld MakerWorld
Electronics

Nintendo DS Unhinged Shell Replacement

121 Descargas
66 Likes
47 Makes
Ver Modelo
This is a shell replacement for the launch model Nintendo DS (NTR-001 aka DS Phat) that also removes the hinges. This is a hingeless design. The top screen will not fold down. The original DS console is known to have plastics that have not aged well, causing the shell to become fragile and commonly cracking/breaking where the hinges are. Sometimes the hinges get lost too. It's common to find lots of DSes on eBay that are already broken for cheap. I designed this with FDM printability in mind at 0.2mm layer height and 0.4mm nozzle diameter. Parts “a” and “b” are meant to be glued/epoxied together. This is to avoid ugly surfaces on the inside/outside and to reduce the supports needed to a bare minimum. I tried my absolute best for these to use as little support as possible. Be extra sure to align all the button holes and edges when gluing these two together. PARTS B AND X REQUIRE SUPPORTS.The top screen attaches to the bottom of the shell with two M2 screws. I recommend using a phill
Categoría
Electronics
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Confianza media
¿Por qué?
soportes necesarios · capas de 0.20mm
Pieza única Soportes requeridos Tornillería requerida
Soportes 2/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA, ABS
Altura de capa
0.2 mm
Postprocesado
Tornillería
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

slucid también publica en

3 modelos adicionales en 2 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección