Thingiverse
Nintendo Logo HD v2.4
von ortizimo
32
Downloads
34
Likes
2
Makes
Saw the Nintendo logo but it doesn't have a part to hold the text unless you use a clear plexi glass. Made this one with a back that can be printed or painted white (interior) to hold the text. Original here. https://www.thingiverse.com/thing:239741.
Contact me if anything is wrong or needs adjustment.
Update #4: 4 days of trial and error. Placed the red ring and letters in a single thing and the white part into another thing. Made holes on the ring and back of the letters to fit into the white prongs. Tested. Just glue the letters to the back then the white part to the ring.
Make sure you print with skirt and no support. Also set diagonally then X to 220 or higher if you can for both prints. Print in their colors or paint.
Update #3: Update #2 did not work as expected. Made the back as wide as the ring for painting/gluing.
Update #2: Combined the font to that back part and have the ring separate. All other versions removed.
Update #1: Made the white part 1.5mm thick
Contact me if anything is wrong or needs adjustment.
Update #4: 4 days of trial and error. Placed the red ring and letters in a single thing and the white part into another thing. Made holes on the ring and back of the letters to fit into the white prongs. Tested. Just glue the letters to the back then the white part to the ring.
Make sure you print with skirt and no support. Also set diagonally then X to 220 or higher if you can for both prints. Print in their colors or paint.
Update #3: Update #2 did not work as expected. Made the back as wide as the ring for painting/gluing.
Update #2: Combined the font to that back part and have the ring separate. All other versions removed.
Update #1: Made the white part 1.5mm thick
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
