Nintendo Switch 2 dock wall mount

I had a Nintendo Switch dock wall mount but the Switch 2 dock is too long to even rest on it. This is a quick model. No logos, nothing fancy. There's a cutout in the back right for the HDMI/Power/Ethernet cables and a cutout in the front left for the power light indicator. Mounting holes are large and sunken in so that you can use whatever screws you have laying around and not scratch up the dock. If you opt to not use the mounting holes, strong double-sided foam tape will work. The back is in one piece with no holes or anything to mess up using tape. It is best to print it sideways and to use some kind of support so that it has holding strength. I used a tree support. The model is 2mm longer than the one I made to account for any support/stringing material that might be stuck and hard to get out. Edit: I was told that there were vent holes in the Switch 2 dock at the bottom. I added long 45 degree strips for air flow