Nintendo Switch 2 Travel Dock

I designed this to make docking the Switch 2 more travel-friendly. It uses the internals from a third-party dock from Antank/SIWIQU (linked below) and fits them into a much smaller printed enclosure. Instead of sliding the Switch 2 directly in, it connects via a USB-C extension cable, which means it works great with most protective cases — including the Killswitch from dbrand — without needing any special adapters. ASSEMBLY:To build it, you’ll need to disassemble the donor dock. IMPORTANT: This needs to be the dock linked below, NOT the dock that comes with the Switch 2 (@voidlesity posted an enclosure using the stock dock if you’re interested!). Remove the foam strips and five screws underneath, then take out the USB-C board and the main board with the I/O ports (each held in with two screws). You’ll reuse all the original hardware, so keep track of your parts during disassembly. The dock on/off button from the stock shell fits into this new case and should be installed before mountin