Nintendo Switch Case Anker PowerCore 20100+ Modification

This is a case modification that I made to keep an Anker PowerCore 20100+ battery pack secure in the cheap zip up clam shell case I bought on Amazon. There is a space to plug in and store a wrapped Type C cable like the one that came with the battery. If you want to use a different cable you might need a 90 degree adapter if the wire at the end of the connector cannot bend into the space. You'll block the other ports, but the adapter should be unpluggable pretty easily if needed to charge an older USB device.

Other than the battery aspect, on the left there is space for 3 cartridges (not pictured because I'm all digital ATM). There is a hinged part that the cartridges sit on that you can pivot them back to kick up the top corner of the games so you can get at them easily (I'll try to get a picture soon to better illustrate it). There is a little space above and below as well for smaller bits or a cleaning cloth.

There is a compartment below the battery with a lid to keep stuff f