Nintendo Switch Joycon Grip -Leaf Pattern

These switch grips are made for the OG and OLED types. I do not believe they will fit the switch lite. Each grip prints in two parts. You need 4x M3x10mm screws or epoxy glue to attach them together. The housing file must be printed as it is oriented in the print profiles/file. Otherwise the part that clips to the top will be weak and break. I suggest printing the housing part in regular PLA or PETG. Matte and silk are too weak for this part and it may break more easily. I also highly suggest sanding the underside of the grip housing that makes contact with supports as it will be very rough. If you don't have sand paper, a nail file will also work. The roughness could possibly scratch your joycon housing so please give it a quick sanding. I used 80 grit and it smoothed it out very quickly. These are a remix from another person's design. https://www.printables.com/model/402105-separate-nintendo-switch-joy-con-grip Changes I made:I made the clip part thicker Added a texture to th