Nintendo Switch tilting cradle

I wanted to be able to store my Nintendo Switch on a bookshelf with little clearance.

This cradle allows the Switch to tilt forward and hold steady at about 45deg while I remove the switch from its charger base, then returns to vertical when the switch is replaced.

The cradle consists of a base and holder and requires two 4mm bolts (around 12mm long) as pivots.

It requires no modification to the switch or charger and the charger can be lifted out of the cradle quickly and easily if required.

The base needs to be secured to the shelf with either double sided tape or screws to prevent the holder tipping.

For printing the holder should be rotated 90deg to avoid the need for supports.