Thingiverse
Niorsuha the Apprentice
von bendansie
392
Downloads
345
Likes
4
Makes
Detailed character sculpture printable without support - download FULL_Niorsuha.stl
The other two files are the same mesh and detail level, just split in a specific place so that both halves don't require support and should join nicely.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
I've been wanting to release a second full character that doesn't require support material for quite a while and now Niorsuha is finally ready for her adventures in the Public Domain!
Files physically sized for 170mm build height with some gap. Might be ok to print slightly smaller in FDM, but I would recommend just printing the two halves for a total of 160mm or so if you have a smaller build volume.
If you want to print much larger or in detailed resin, there should be ample detail there.
Approx 1.8 million Tris total. Let me know if a further decimated version would be handy.
Tested with Simplify3D and a Dremel 3D40.
The other two files are the same mesh and detail level, just split in a specific place so that both halves don't require support and should join nicely.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
I've been wanting to release a second full character that doesn't require support material for quite a while and now Niorsuha is finally ready for her adventures in the Public Domain!
Files physically sized for 170mm build height with some gap. Might be ok to print slightly smaller in FDM, but I would recommend just printing the two halves for a total of 160mm or so if you have a smaller build volume.
If you want to print much larger or in detailed resin, there should be ample detail there.
Approx 1.8 million Tris total. Let me know if a further decimated version would be handy.
Tested with Simplify3D and a Dremel 3D40.
bendansie veröffentlicht auch auf
11 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
