Thingiverse
NLR - Race Quadcopter
door noahlayer
4
Downloads
8
Likes
0
Makes
Hey,
new and easy printable quadcopter frame! It is designed for lightweight, strengh and lots of fun. The frame is 250mm in size and weights just 170 gramm.
The frame at its current state is designed for flying without FPV. Nonetheless you can put a camera on the big battery base. Moreover on the lower base it is has room for the flightcontroller, receiver and a FPV facility.
The arms are made for motors with m3 screws with a hole distance of 19mm and 16mm.
For assembly you need:
16x m3 screws for your motors
8x m3 screws with a length of 10mm for the battery base
8x m3 screws with a length of at least 16mm
8x m3 nuts work best self-retaining nuts
Infil for invidual parts:
Arm-> 75% with honeycomb
ArmSupport-> 80% with honeycomb
Base-> 80% with honeycomb
BatteryBase-> 20% with rectilnear or honeycomb
Spacer-> 100% rectilnear
Please leave comments how good the race quad flies :)
new and easy printable quadcopter frame! It is designed for lightweight, strengh and lots of fun. The frame is 250mm in size and weights just 170 gramm.
The frame at its current state is designed for flying without FPV. Nonetheless you can put a camera on the big battery base. Moreover on the lower base it is has room for the flightcontroller, receiver and a FPV facility.
The arms are made for motors with m3 screws with a hole distance of 19mm and 16mm.
For assembly you need:
16x m3 screws for your motors
8x m3 screws with a length of 10mm for the battery base
8x m3 screws with a length of at least 16mm
8x m3 nuts work best self-retaining nuts
Infil for invidual parts:
Arm-> 75% with honeycomb
ArmSupport-> 80% with honeycomb
Base-> 80% with honeycomb
BatteryBase-> 20% with rectilnear or honeycomb
Spacer-> 100% rectilnear
Please leave comments how good the race quad flies :)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
