No otherworldly entry

No otherworldly entryPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.39x200mm in size. You can adjust the dimensions along the X and Y axes proportionally, but do not change the height of the model (Z axis).You may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 2.3mm and the Actual Depth is 1.9mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Brown At layer #10 (0.88mm) swap to Red At layer #14 (1.2mm) swap to Pumpkin Orange At layer #16 (1.36mm) swap to White for the rest.