Thingiverse
Noiseless Raspberry Pi 3 Microserver
von Multimedia4Linux
9
Downloads
7
Likes
0
Makes
The Noisless Raspberry Pi Microserver is a combination of a Raspberry Pi 3B or 3B + and a Renkforce SSD converter. The SSD converter can accommodate M.2 SATA SSD with up to 2TB storage capacity and is connected to the Raspberry Pi via a USB cable.
Since the Raspberry Pi 3B can be passively cooled, the microserver generates absolutely no noise.
We use the device the Octoprint 3D print server.
Release note:
X500-1000 Rev. 01
- Alternative mounting solution for the casing top part added (Part X500-1211)
X500-1000 Rev. 02
- The standoffs have been changed because the 10mm and 12mm lengths are easier to obtain. The lower part of the housing also had to be changed.
X500-1000 Rev.03
- The standoffs are now glued directly to the upper part. A threaded bush is no longer necessary.
Since the Raspberry Pi 3B can be passively cooled, the microserver generates absolutely no noise.
We use the device the Octoprint 3D print server.
Release note:
X500-1000 Rev. 01
- Alternative mounting solution for the casing top part added (Part X500-1211)
X500-1000 Rev. 02
- The standoffs have been changed because the 10mm and 12mm lengths are easier to obtain. The lower part of the housing also had to be changed.
X500-1000 Rev.03
- The standoffs are now glued directly to the upper part. A threaded bush is no longer necessary.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
