Non-Planar Print Code for FlashForge Finder

I took Teaching Tech's gcode file and edited it with GWizardE (a CNC software) to center it on my build plate. I also added my own ;start gcode and ;end gcode. Printed fine on my un-modded FlashForge Finder. PLEASE put it through CURA or some other software before you print it to make sure it will fit on your plate. I learned the hard way, it started melting the thing that holds the build plate because it wasn't centered properly. I fixed that, still isn't perfectly centered but it fits on the bed. Also, level the bed 2-3 times before printing to ensure a good print. I was unable to add a raft or anything like that to the print because of the limits of the software I used. *Should work perfectly though.

*If you have a FlashForge Finder.

The control for the test is the .stl file. You can slice and print that however you want.
The .gcode is the non-planar version of the same model.