Noodle Dispenser, modular, wall mounted

Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hi there! I created a modular noodle dispenser that you can add to your wall and expand as you need. The interior dimensions are 130mm x 140mm to make space for large noodle packets. You can print each dispenser in parts, or whole pieces and connect them together. They clip together nice and strong with 0.1mm tolerances. Make sure you stack them with support from the bottom, or stick them to the wall with double sided tape like I have. I've printed mine in PETG and PLA, and they seem to work well as the walls are quite strong. There are holes in them if you want to screw them to the wall, plenty of space for some strong double sided tape / command strips, or with a small adjustment of the model it could work well with suction cups as well. I played around with printing this on different angles to make the clips stronger. But in the end, i found printing in this orientation is the simplest solution besides designing it differently   Notes on the prints in the pictures: White: PETG - there are lines as I slowed speed, then switched Filament brand halfway through Green: PLA bambu lab basic. Printed the cleanest ! Red: PETG HF - I didn't dry this filament first as you are supposed to, so it didn't print super clean Be gentle with the clips, as they can break off because of the way the layer lines are on this print NOTE: Purchasing this model includes a Personal License so you can print this for personal use. If you'd like to print and sell this model yourself, you can sign up for a Vendor License over at my Patreon page https://patreon.com/CosmicNimbusPrinting At no point are you allowed to distribute or sell my model files I think it's fair that I retain the rights to the model files that I create Thanks for checking out my models ! Cosmic Nimbus