Noperabo Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 186.67x250mm in sizeYou may print at higher layer heights below the Base Thickness of 0.4mmThe Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #646c74 PLA Copymaster 3D Grey Transmission Distance: 1.5 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Jade White At layer #5 (0.64mm) swap to Grey At layer #11 (1.12mm) swap to Black At layer #14 (1.36mm) swap to Red At layer #18 (1.68mm) swap to Jade WhiteBorder Only Colors from here until the end. At layer #25 (2.24mm) swap to Red for the rest. You can swap the second white at 1.68mm with yellow(preffered), orange or gold. Since that level is for the smokes/flowers it blends in nicely