Nordschleife - HueForge

The Nordschleife is one of the most iconic race tracks in the world. This HueForge shows the layout of the track Instructions: Project: nordschleife.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 178.57x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2mm and the Actual Depth is 1.5mm Filaments Used:PETG GEEETECH BLACK Transmission Distance: 0.5PETG BambuLab Basic Blue Gray Transmission Distance: 2.7PETG GEEETECH GREEN Transmission Distance: 5.9This print uses 3 unique filaments Swap Instructions:Start with BLACKAt layer #8 (0.72mm) swap to Blue GrayAt layer #10 (0.88mm) swap to GREEN for the rest. You can scale down the model in your slicer, but only scale down in the x and y direction. The height of the modell must stay the same.