Not A Mimic

Project: Not_A_Mimic_170.hfpPrint at 100% infill with a layer height of 0.2mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Base Thickness of 0.56mmThe Max allowed Thickness is 2.36mm and the Actual Thickness is 2.36mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #8c9099 PLA PolyLite Grey Transmission Distance: 1 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 5 #e2dedb PLA PolyLite White Transmission Distance: 5 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #6 (1.16mm) swap to Grey At layer #8 (1.56mm) swap to Blue GrayBorder Only Colors from here until the end. At layer #10 (1.96mm) swap to WhiteThis slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it. At layer #14 (2.76mm) swap to Black for the rest.