Notificator

This is a small notification system. It's running WLED installed on a ESP32 and powered by a generic USB-C charger.You need to fixate the led strip with glue or tape in the base.I recommend printing the model in PETG so it doesn't shrink too much in the holes.You might need a little bit of sanding in the holes or on the rods if the fit is to snug. Equipment used Esp32:https://a.aliexpress.com/_EJrptYk Acrylic rods:9x10mm (length 100mm)https://a.aliexpress.com/_EHXofC8 Leds:60 leds/meter (only used 9 of the leds in this project)https://a.aliexpress.com/_EJTwaJm