Thingiverse
Nova Sock Mold
por pawlowski
0
Descargas
1
Likes
0
Makes
This is a mold for a silicone sock for Nova.
It's not tested, so use with caution. In case you need to modify the full CAD is available on [OnShape](https://cad.onshape.com/documents/4adb20e1bfdb1ec3e5f71674/w/f6c08824ab6aeb8244eafe8d/e/79eff2ccca432631e358fbd8?renderMode=0&uiState=6289822abd59bc5395f15671)
You'd need to some long M3 bolts and nuts to screw everything together.
It is meant to be used in upside down configuration, where the nozzle is screwed into the heatbreak hole and vice versa. If you want to use it with a stock Nova then mirror all parts before printing.
A good compound for extruder socks is Smooth-On Mold Max 60, survives up to 300C.
It's not tested, so use with caution. In case you need to modify the full CAD is available on [OnShape](https://cad.onshape.com/documents/4adb20e1bfdb1ec3e5f71674/w/f6c08824ab6aeb8244eafe8d/e/79eff2ccca432631e358fbd8?renderMode=0&uiState=6289822abd59bc5395f15671)
You'd need to some long M3 bolts and nuts to screw everything together.
It is meant to be used in upside down configuration, where the nozzle is screwed into the heatbreak hole and vice versa. If you want to use it with a stock Nova then mirror all parts before printing.
A good compound for extruder socks is Smooth-On Mold Max 60, survives up to 300C.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!