Nozzle cleaner

Nozzle cleaning system used for d-bot like setup
there 2 versions. I am using 2nd one. For the first version need to find proper filament or made it from high temp silicone
1st
mbot-ncleaner-p1.stl
mbot-ncleaner-p2.stl
mbot-ncleaner-p3.stl - this part should be printed from nylon or any hi temperature material

2nd
mbot-ncleaner-p1.stl
mbot-ncleaner-p2-v2.stl - insert the nylon cable tie as cleaner

Also you need bolt m4x50 (or check you length) and m4 nut

See how it works
https://youtu.be/JTeZovYv2Ek
https://youtu.be/6UNPKr_04b4
Will attach photo soon.

I have home position with negative value on axis X -20 outside bed (but it doesnt matter, jut need area to clean nozzle)

In gcode using this snippets to clean nozzle at start or change tool
Clean nozzle (put it after nozzle is ready and it was homing was done and x already on the postion to use cleaner):
G90 ;absolute positioning
M83 ;Set extruder to relative mode
M106 S200 ; enable cooler