Nozzle Cleaner

Nozzle Cleaner for Anycubic Vyper with silicone damper Bed Mod
Unfortunately, none of the existing nozzle cleaners fit if the print bed has been modified with silicone dampers.

https://github.com/cryd-s/Vyper_exten...

For this reason I designed one that fits with or without bed modification.

Another advantage is that the distance to the print bed is reduced to the absolute minimum.

Additional material required:

3 pieces each of M3 screw (min. 8 mm long) with nut

Wire brush →https://de.aliexpress.com/item/1005005658637213.html?spm=a2g0o.order_list.order_list_main.9.130a5c5fNbB1AX&gatewayAdapt=glo2deu

Update:

Unfortunately, PLA has not proven itself (see photo)

For this reason, I have revised the design:

At the front it now has 2 holes ⌀ 3 mm into which you can screw M3 countersunk screws. The screws should be at least 30 mm long and a maximum of 50 mm.

However, a nail or other piece of metal can also be used. It may be necessary to drill out the hole a little so that it f