nozzle cleaning bin

nozzle cleaning bin

Scripts change tool

T[old_tool]
G92E0 ;
G1 E-3 F3600 ; retract the filament from melting zone
G92E0 ;
G0 X320 F6000 ;move the hotend to bed edges or corners to finish the filament swap job. normally over the prim pillar is ideal
G1 E3 F3600;
G92E0 ;
G1 E10 F300;
G92E0 ;
G4 S5 ;wait for 5 second to reduce the filament stringing
G1 E-50 F9000 ;
G92E0 ;
G1 E-80 F6000 ; retract the filament cross the intersection back to the it?s own tube waiting for the Gcode summon. distance is depending on your hardware setup
G92E0

//{IF NEWTOOL=0}
//{IF NEWTOOL=0}M109 S210 T0 ; set nozzle temperature to 210 when select Tool 0
//{IF NEWTOOL=0}M109 S210 T1
//{IF NEWTOOL=1}
//{IF NEWTOOL=1}M109 S190 T0;set nozzle temperature to 190 when select Tool 1
//{IF NEWTOOL=1}M109 S190 T1


T[new_tool]
G92 E0;
G1 E125 F3000 ;extrude the new selected filament to the nozzle
G92 E0;
G1 E4 F180;
G92 E0;
//G1 E-3 F3600 ; retract the filament