Thingiverse
NP1 Battery eliminator
door wildteq
0
Downloads
0
Likes
0
Makes
NP1 battery eliminator - useful for temporary powering a sound mixers bag or cart gear without disturbing cables - can be wired to a mains 12V power supply, D-tap, 4-pin XLR or otherwise.
To complete the unit you will need:
1 - A suitable 2-core cable approx 5~6mm in diameter to external power.
2 - 6mm wide nickel strip as used for battery tags (Amazon has it).
3 - two-part epoxy glue to cover the wire connections and a tie wrap to hold the cable.
4 - Soldering iron and solder to make the connections and plyers' to cut, bend and poke the nickel strip with.
Printing is just over 3 hours for my printer and settings
To complete the unit you will need:
1 - A suitable 2-core cable approx 5~6mm in diameter to external power.
2 - 6mm wide nickel strip as used for battery tags (Amazon has it).
3 - two-part epoxy glue to cover the wire connections and a tie wrap to hold the cable.
4 - Soldering iron and solder to make the connections and plyers' to cut, bend and poke the nickel strip with.
Printing is just over 3 hours for my printer and settings
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!