Thingiverse
NUC NAS
di mracgeern
5
Download
7
Likes
0
Makes
7 drive Nas made from a NUC7i3BNH and some old laptop drives , used an aliexpress M.2 to 6 port sata controller card and the 1 onboard sata port.
runs OMV from an m.2 to usb enclosure.
the main tower and shelf was printed with supports for the fan holes on a creality M1 max
The nuc is held onto the tower using 2x m2.5 x 300mm and some washers and nuts
The stackable 2.5" hdd trays and locking strips were printed on a creality ender 3 V3 Se
the shelf can be super glued at any height to suit the build.
runs OMV from an m.2 to usb enclosure.
the main tower and shelf was printed with supports for the fan holes on a creality M1 max
The nuc is held onto the tower using 2x m2.5 x 300mm and some washers and nuts
The stackable 2.5" hdd trays and locking strips were printed on a creality ender 3 V3 Se
the shelf can be super glued at any height to suit the build.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
