Nuclear Blast Wave Hueforge

This can be printed with 1 AMS unit. Assign Black and White to the same AMS slot. After the Black baselayer finishes (about 1:15 minutes) swap it out for white. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x146.67mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #14 (1.2mm) swap to Orange At layer #20 (1.68mm) swap to Yellow At layer #27 (2.24mm) swap to Jade White for the rest. Please like and comment if you enjoyed this print. Thanks!