Thingiverse
Nuka Cola Wall Clock
door ohaaland
166
Downloads
286
Likes
0
Makes
This is a simple Nuka Cola clock I made in Fusion 360 / MS 3D Builder.
I simply got a free OBJ bottle cap and found the logo online, then created the geometry and polished it off.
The hole in the middle of the clock is 12mm across in order to seat a DIY clock-kit locking cap.
Print at 0.2 or 0.3 mm layer height, use supports for the middle of the clock (i use tower supports for easy removal).
Switch the color of filament at the last layers from red to white to get that logo popping!
I simply got a free OBJ bottle cap and found the logo online, then created the geometry and polished it off.
The hole in the middle of the clock is 12mm across in order to seat a DIY clock-kit locking cap.
Print at 0.2 or 0.3 mm layer height, use supports for the middle of the clock (i use tower supports for easy removal).
Switch the color of filament at the last layers from red to white to get that logo popping!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
