nutcracker magnet or bookmark

Project: nutcraker.hfp I own the license to the image.I glued 2 button magnets onto the back.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120x120mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Geeetech Grey Transmission Distance: 1 PLA BambuLab Basic Ja