Slicer Discord
NYE Ball Drop Gravity Timer – 3D-Druckmodell von MakerWorld MakerWorld
Festivities

NYE Ball Drop Gravity Timer

119 Downloads
58 Likes
111 Makes
Zum Modell
Celebrate your New Years with this Ball Drop Gravity Timer which slowly drops the ball over a period of 30 seconds (give or take 1 or 2 seconds). Most 3D printed clocks require metal rods, bearings, and screws because they need to be precise. However, since this project only really needs to last for 30 seconds, I was able to design a basic timer with no rods, bearings, or screws, you just need a 3d printer.This design is based on a design of a gravity clock. Most people are aware of the standard pendulum grandfather clock which relies on a weight on a string to power it. This design is based on a much older and less reliable version called the Sawtooth Clock or an Anno Clock, instead of using a weight on a string, it uses its own weight to provide it constant power. This is what moves the timer downwards but it requires a rewind much like every gravity clock. Due to the limitations of the sawtooth design coupled with a pendulum, this timer is susceptible to rocking which causes it to b
Kategorie
Festivities
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Procs Design veröffentlicht auch auf

4 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen