Thingiverse
Obertech Phantom, polymer folding utility knife
von Obertech
61
Downloads
261
Likes
0
Makes
The Phantom polymer knife is available with two assembly options: M3 screws or printed pins.
Blade options: Tanto with serrated edge, Warncliffe with serrated edge.
Knife Parameters:
Length - 241 mm
Handle Length - 136 mm
Blade Length - 105 mm
Blade Thickness - 5 mm
Knife Thickness - 16 mm
Lock Type - Back Lock
Print Parameters:
Infill Density - 100%
Material: PLA, PET-G, or stronger plastics
Spring Material: ABS
Layer Height - 0.2 mm
Print Speed - 50 mm/s
Assembly with screws:
M3x14 screws x 5
M3 nuts x 5
M3 washers x 3
Assembly using printed pins:
Pin 1: 5 pcs.
Pin 2: 5 pcs.
The pins must be secured with universal glue.
Blade options: Tanto with serrated edge, Warncliffe with serrated edge.
Knife Parameters:
Length - 241 mm
Handle Length - 136 mm
Blade Length - 105 mm
Blade Thickness - 5 mm
Knife Thickness - 16 mm
Lock Type - Back Lock
Print Parameters:
Infill Density - 100%
Material: PLA, PET-G, or stronger plastics
Spring Material: ABS
Layer Height - 0.2 mm
Print Speed - 50 mm/s
Assembly with screws:
M3x14 screws x 5
M3 nuts x 5
M3 washers x 3
Assembly using printed pins:
Pin 1: 5 pcs.
Pin 2: 5 pcs.
The pins must be secured with universal glue.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
