Ocean Sunset Hueforge Bookmark

Hueforge Bookmark Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 49.58x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.32mmThe Max allowed Thickness is 2.08mm and the Actual Thickness is 1.67998mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #4 (0.4mm) swap to Indigo Purple At layer #6 (0.56mm) swap to Black At layer #10 (0.88mm) swap to Cobalt Blue At layer #14 (1.2mm) swap to Yellow for the rest.