OctoPi Raspberry Pi Support Bracket

Shortly after setting up my CR-10S, I discovered OctoPi (great software!). I saw several supports for the Raspberry Pi (RPi) and wanted to both reduce the cable clutter and be able to leverage a USB based webcam instead of the RPi based camera. I very much like what https://www.thingiverse.com/thing:2570622 did in his SD card holder leveraging the power supply screws to hold to the side of the control box. I took the RPi case from the referenced remixes and designed a support bracket that permits the RPi to be mounted to the side of the control box using the 2 remaining power supply screws. Note, be careful when selecting screws to ensure that don't protrude into the housing further than needed!

Although the picture shows it printed in blue, I have since reprinted the bracket and RPi case in black to match the control unit.

The flanges that hold the case are a bit fragile as I sized them to match the original design. Care must be taken to 1) remove the support bracket from the b