Octopus

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 114.29x200.01mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Prima Value Light gray Transmission Distance: 5 PLA PolyTerra Cotton White Transmission Distance: 1.5 PLA PolyTerra Sapphire Blue Transmission Distance: 0.3This print uses 4 unique filaments Swap Instructions: Start with Charcoal Black At layer #8 (0.72mm) swap to Light gray At layer #14 (1.2mm) swap to Cotton White At layer #19 (1.6mm) swap to Sapphire Blue At layer #23 (1.92mm) swap to Cotton White for the rest.