Thingiverse
Odroid-C2 Pifacecad2 case
7
Download
5
Likes
0
Makes
Case for Odroid-C2 with module Piface Control & Display 2 from Farnell.
- Design for ABS with circle pads to prevent warping.
- The hole in the top case is for additionnal button PCB.
- Important !
To be fonctionnal with the bitbang driver, the Pifacecad2 need this hardware change : Switch pins CE0 and CE1 !
* Desolder pins N°24 and 26 from the Odroid
* Solder two wire from the Odroid pins 24 et 26 on the Pifacecad , but cross them.
- Design for ABS with circle pads to prevent warping.
- The hole in the top case is for additionnal button PCB.
- Important !
To be fonctionnal with the bitbang driver, the Pifacecad2 need this hardware change : Switch pins CE0 and CE1 !
* Desolder pins N°24 and 26 from the Odroid
* Solder two wire from the Odroid pins 24 et 26 on the Pifacecad , but cross them.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!