ODROID H3 Cluster

ODROID H3/H3+ cluster

3D printed Parts:
Storage wallmount: 2xHDD 3.5 inch + 2xSSD with USB adapters
Storage wallmount top plate: for aesthetics
cover mount
+https://www.thingiverse.com/thing:5972631 of wall mount bottom any top with cable slot is applicable
+https://www.thingiverse.com/thing:29628 SSD-HDD adapter (if applicable)

Laser cut parts:
mountingboard.dxf : 6mm acrylic with 4x5.3mm wall mount holes and and 36x5.1mm holes for brazz-inserts
protectionboard.dxf (optional): 3mm acrylic with cut-outs for fans, M3 holes for mounting

Fasteners:
36 x https://www.123-3d.se/123-3D-Ganginsatser-M4-x-6-0mm-x-6-0mm-20st-i6874-t9745.html (should be available elsewhere)
36 x M4x10mm screws
4 x M4x6mm (hole is 5mm diameter) brazz inserts (for cover mount)
4 x M4x8mm screws
24 x M3x5mm flat screw head for SSD
24 x 6-32, 3/8" (dont speak imperial)

Holes towards mountingboard in 3D printed parts might need drilling dependant on printer an material, I recommend printing