Odroid X2 Case

This is a simple 5-piece model for the Odroid X2 board. It is designed to be able to house the computer along with enough headroom for a heatsink and 40mm fan on top. The "Button Pins" are supposed to stay on the buttons as the top section is inserted, and as such the tabs keep the pins from falling out if turned upside down, you can refer to the last image to see how they are supposed to go. For mounting the board you will need 4 M3 screws (preferably plastic ones) along with 4 M3 nuts to insert in the bottom. You will also need an additional M3 screw and nut to connect the top to the bottom, which, while it isn't even close to robust, should allow to be picked up and such granted you tighten it enough.

I also want to give credit to APESystems (https://www.thingiverse.com/APESystems/about) for the Odroid X2 reference model, I could not have done this without them.

Make sure you print 3 of the "Button Pins" for each of the 3 buttons, following the color scheme is optional but rec