Thingiverse
Electronics
Zum Modell
Odroid XU4 case
90
Downloads
69
Likes
5
Makes
A friend needed an ODROID XU4 case so I downloaded the STEP-files from here: http://dn.odroid.com/homebackup/ODROID-XU4Cas_SETP.zip
I imported them to 123D Design and exported as STL (medium setting). Then imported to Tinkercad and shaved off the 4 tiny legs on the base and a tiny bit of the "button" on the top, this in order to make them flat for the printing bed.
Printed fine without any supports on my XYZprinting Da Vinici Mini w with the "Excellent" preset.
If you print this you probably want to add some new distances to the base after printing to replace the ones I removed.
I imported them to 123D Design and exported as STL (medium setting). Then imported to Tinkercad and shaved off the 4 tiny legs on the base and a tiny bit of the "button" on the top, this in order to make them flat for the printing bed.
Printed fine without any supports on my XYZprinting Da Vinici Mini w with the "Excellent" preset.
If you print this you probably want to add some new distances to the base after printing to replace the ones I removed.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
