Offset U94/Nexus PTT Mount

I needed a way to offset my PTT from the admin panel on my carrier further than other options out there. Print in PETG/PETG-CF, or other tough/malleable material. I used a heatgun to put a bend in the part right next to the molle attachment studs, so it tucks in very close to the carrier. The 6 larger holes around the exterior are for routing shock cord.The inner holes are for mounting the PTT, button-in or button-out. Use 2x M3x25 bolts and nuts to attach PTT to the mount using the inner holes on your PTT.