Oil BOX V2

Version 2 oil can Dimensions:Base height: 88 mmHeight including cap: 140 mm Approximate volume: 50 mlThe oil can is refillableThe diameter of the end cap hole is 1.2 mm for better liquid flowNew shape for better gripThe best way is to print the base of the oil can from TPU because you can press it easily. PLA BASIC or PETG can also be used. Print profiles are available. When using materials such as PLA or PETG, it is necessary to apply slightly more pressure to the body of the oil can. Please NOTE: Make sure you print the base of the oil can on a textured PEI plate. Experience has shown that this is the best way, as the bottom of the oil can is impermeable. It is also necessary to print the body of the oil can with 100% infill. Either a TPU cap (available) or an O-ring measuring 16x1mm or 16x1.5mm (OD x thickness) can be used as a seal between the oil can body and the tail piece itself. It can be print easy without any supports. If you have any question jus ask me.