Omni-Man

This is omni-man from invincible. this is based off a screenshot from the tv show. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.32mmThe Max allowed Thickness is 2.08mm and the Actual Thickness is 2mmFilaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Scarlet Red At layer #14 (1.2mm) swap to Marine Blue At layer #18 (1.52mm) swap to White for the rest. Those are just the filaments i had on hand. use whatever you want.To scale it, change the x and y dimensions, do not change the z dimension. Boost Meboost me if you like my prints