MakerWorld

Hueforge & Lithophane

One Piece Bookmark

by Don Roberto · Hueforge & Lithophane

58 Downloads

20 Likes

38 Makes

Ein schönes Lesezeichen für alle One Piece FansDruckanleitung:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmSwap Instructions: Start with Red At layer #15 (1.28mm) swap to White for the rest.

ONE PIECE one piece bookmarks

Category

Hueforge & Lithophane

Source

MakerWorld

Published

21.03.2025

Updated

30.04.2026

What you need to print this: Beginner Low confidence

Why?

print-in-place design

Print-in-place

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for One Piece Bookmark?

Any FDM printer should handle One Piece Bookmark just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does One Piece Bookmark need supports when printing?

Nope — One Piece Bookmark is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

What file format is One Piece Bookmark available in?

One Piece Bookmark is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is One Piece Bookmark free to download?

Yes, One Piece Bookmark is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

One Piece Bookmark

Similar Models

Add to Collection