One Piece Hueforge

https://www.patreon.com/cw/3D_MENTIEL Si vous aimez mon travail, venez faire un tour sur mon Patreon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 199.98x199.98mm in size You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm #000000 PLA Deeplee Black Transmission Distance: 0.2 #1f3f9d PLA Forshape+ Blue Transmission Distance: 2.5 #54718e PLA Forshape Grey Transmission Distance: 1.6 #ffffff PLA Forshape White Transmission Distance: 5 #d70610 PLA Forshape+ Red Transmission Distance: 3.6 #ff7752 PLA Forshape+ Orange Transmission Distance: 5 #f7e735 PLA Forshape+ Yellow Transmission Distance: 7.1 This print uses 7 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue At layer #12 (1.04mm) swap to Grey At layer #15 (1.28mm) swap to White At layer #17 (1.44mm) swap to Black At layer #21 (1.76mm) swap to Red At layer #23 (1.92