One Piece Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 200x220mm in size; if you adjust size, please do not adjust Z Height.If you only have 1 AMS: At layer 7 once filament swaps to red replace the black with white inside the AMS.Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6.4 PLA BambuLab Basic White Transmission Distance: 4.9Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #20 (1.68mm) swap to Yellow At layer #26 (2.16mm) swap to White for the rest.