One Piece Luffy Hueforge

Luffy's fierce attack is coming! Print Instruction: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.32mm Filaments Used: #000000 PLA Black Transmission Distance: 0.2 #0086d6 PLA Basic Cyan Transmission Distance: 2.4 #cd382e PLA Red Transmission Distance: 4.2 #ffff00 PLA Yellow Transmission Distance: 6 #ffffff PLA White Transmission Distance: 6.2 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Cyan At layer #8 (0.72mm) swap to Black At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #16 (1.36mm) swap to White At layer #20 (1.68mm) swap to Cyan At layer #22 (1.84mm) swap to White for the rest. For only One AMS, Start with 4 colors as follows: Slot1: Black Slot2: Cyan Slot3: Red Slot4: Yellow Pause at Layer 10 to