One Piece Sabo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 107.94x161.9mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickn ess is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.6 #52595d PLA+ Numakers Dark Gray Transmission Distance: 0.4 #d22332 PLA+ Sunlu Red Transmission Distance: 3 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Dark Gray At layer #18 (1.52mm) swap to Red At layer #24 (2mm) swap to White for the rest.