Thingiverse

One Piece Simple Direct Drive Extruder

by Tobeca

45 Downloads

46 Likes

0 Makes

Very compact, only 50x42x20mm !!
Only one simple piece to print for the whole extruder !!

This is a very simple extruder for NEMA17 motors. Designed for 3mm filament. I think a PTFE pipe to adapt 1.75mm is possible.

You just need a brass insert (Like Adrian Geared Extruder) and a 608ZZ bearing (+ screw and nut).

No springs, you have to adjust the pressure at the mounting of the motor.

extruder mount

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

print-in-place design

Print-in-place Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for One Piece Simple Direct Drive Extruder?

Any FDM printer should handle One Piece Simple Direct Drive Extruder just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does One Piece Simple Direct Drive Extruder need supports when printing?

Nope — One Piece Simple Direct Drive Extruder is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

What file format is One Piece Simple Direct Drive Extruder available in?

One Piece Simple Direct Drive Extruder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is One Piece Simple Direct Drive Extruder free to download?

Yes, One Piece Simple Direct Drive Extruder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

One Piece Simple Direct Drive Extruder

Add to Collection