One pieces logo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 220.11x123.81mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA Red Transmission Distance: 4.5 PLA Yellow Transmission Distance: 6.8 PLA Basic White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #18 (1.52mm) swap to Yellow At layer #25 (2.08mm) swap to Jade White for the rest.