OneBlade Blade Guard

Replacement travel cover/blade guard for Phillips OneBladeVersions:Guard: normal version with bump for removal at the backGuard_Cutout: normal version with a cutout at the back for more flexibilityGuard_Short: shorter version with bumpGuard_Short_Cutout: shorter version with cutoutI recommend using the normal version for PETG. The version with a cutout is more suitable for PLA.The short version is not recommended since the detent doesn't hold as well, but you might get it to work if you really want it smaller.Filenames are:[Version]_[Layer height]_[Filament]_[Tolerance plip]_[Tolerance press] Printing:If you just want to try out all the different versions, use the .3mf file.Otherwise:The model is designed for a 0.4mm nozzle, 0.2mm layer height and 0.42mm extrusion width, so i recommend you print it like this.PETG is recommended for better longevityPrint uprightPrint slow (the model is pretty small and has tight tolerances)I recommend printing seperately for less stringing and bette